Hybrid systems combining liposomes and entangled hyaluronic acid chains: Influence of liposome surface and drug encapsulation on the microstructure.

Mixtures of hyaluronic acid (HA) with liposomes lead to hybrid colloid-polymer systems with a great interest in drug delivery. However, little is known about their microstructure. Small angle neutron scattering (SANS) is a valuable tool to characterize these systems in the semi-dilute entangled regime (1.5% HA) at high liposome concentration (80 mM lipids). The objective was to elucidate the influence of liposome surface (neutral, cationic, anionic or anionic PEGylated), drug encapsulation and HA concentration in a buffer mimicking biological fluids (37 °C). First, liposomes were characterized by SANS, cryo-electron microscopy, and dynamic light scattering and HA by SANS, size exclusion chromatography, and rheology. Secondly, HA-liposome mixtures were studied by SANS. In HA, liposomes kept their integrity. Anionic and PEGylated liposomes were in close contact within dense clusters with an amorphous organization. The center-to-center distance between liposomes corresponded to twice their diameter. A depletion mechanism could explain these findings. Encapsulation of a corticoid did not modify this organization. Cationic liposomes formed less dense aggregates and were better dispersed due to their complexation with HA. Liposome surface governed the interactions and microstructure of these hybrid systems.

Superchaotropic nano-ions as foam stabilizers.

HYPOTHESIS: Weakly hydrated nanometric ions, called superchaotropes, were recently shown to adsorb strongly to non-ionic surfaces affecting drastically the surface's physical-chemical properties due to a charging effect. Superchaotropic ions could serve as stabilizing agents for non-ionic colloidal systems, such as non-ionic surfactant foams. EXPERIMENTS: We study foams of the non-ionic surfactant BrijO10 (C18:1E10) without and in presence of the superchaotropic Keggin-ion SiW12O404- (SiW). The foams are investigated under free drainage conditions by image analysis and conductimetry to reveal the effect of SiW on the foam stability, liquid drainage, and bubble size. Additionally, small angle neutron scattering on the same foams, but in a dry quasi-stationary state, provides insight into effects of SiW on the foam films. FINDINGS: SiW strongly stabilizes non-ionic surfactant foams at millimolar concentrations by inducing electrostatic repulsions between foam film interfaces resulting in thicker and monodisperse foam films. A similar effect is observed with the ionic surfactant sodium dodecylsulfate (SDS) but to a lesser extent and with a different mechanism. At the foam films' interface, SiW adsorbs to the polar non-ionic surfactant heads driven by the superchaotropic effect whereas DS- anchors between non-ionic surfactant alkyl chains by the hydrophobic effect. The potential of superchaotropic ions as foam stabilizers is herein demonstrated.

Spontaneous Ouzo Emulsions Coexist with Pre-Ouzo Ultraflexible Microemulsions.

Even in the absence of surfactants, polymers, or particles, spontaneous emulsions produced by dilution with water can be stable over days. This "Ouzo effect" used by the industry is obtained by rapid dilution from an identified "pre-Ouzo" domain of composition where weak aggregates are present: nanometer-sized clusters covered by a surface layer enriched in a hydrotrope such as ethanol. In these systems, Ostwald ripening is not an effective destabilizing mechanism. Using in situ autodilution small-angle X-ray scattering (SAXS), we follow the morphological transitions occurring in a ternary mixture of water/n-octanol/ethanol throughout the monophasic and biphasic regions. This allows for the first time an online characterization of the multiscale coexisting microstructures. Small-angle neutron scattering (SANS) profiles on metastable emulsions as well as phase-separated samples complete the SAXS data, taking advantage of contrast variation via isotopic substitution. After crossing the phase boundary into the two-phase region, coexisting phases are both ternary solutions structured at the nanometer scale when the emulsion is stable. The transition from single phase to two phases is asymmetric around the plait point. When the initial concentration of the hydrotrope is below the minimum hydrotrope concentration (MHC), emulsification failure occurs, i.e., emulsions cream within seconds. Beyond MHC, the low interfacial tension between coexisting ternary fluids results in a Laplace pressure below 100 Pa, explaining the puzzling resilience of spontaneous emulsion to the universal mechanism of Ostwald ripening.

Understanding the temperature induced aggregation of silica nanoparticles decorated with temperature-responsive polymers: Can a small step in the chemical structure make a giant leap for a phase transition?

Temperature-responsive nanomaterials have gained increasing interest over the past decade due their ability to undergo conformational changes in situ, in response to a change in temperature. One class of temperature-responsive polymers are those with lower critical solution temperature, which phase separate in aqueous solution above a critical temperature. When these temperature-responsive polymers are grafted to a solid nanoparticle, a change in their surface properties occurs above this critical temperature, from hydrophilic to more hydrophobic, giving them a propensity to aggregate. This study explores the temperature induced aggregation of silica nanoparticles functionalised with two isomeric temperature-responsive polymers with lower critical solution temperature (LCST) behavior, namely poly(N-isopropyl acrylamide) (PNIPAM), and poly(2-n-propyl-2-oxazoline) (PNPOZ) with similar molecular weights (5000 Da) and grafting density. These nanoparticles exhibited striking differences in the temperature of aggregation, which is consistent with LCST of each polymer. Using a combination of small-angle neutron scattering (SANS) and dynamic light scattering (DLS), we probed subtle differences in the aggregation mechanism for PNIPAM- and PNPOZ-decorated silica nanoparticles. The nanoparticles decorated with PNIPAM and PNPOZ show similar aggregation mechanism that was independent of polymer structure, whereby aggregation starts by the formation of small aggregates. A further increase in temperature leads to interaction between these aggregates and results in full-scale aggregation and subsequent phase separation.

Morphology of bile salts micelles and mixed micelles with lipolysis products, from scattering techniques and atomistic simulations.

HYPOTHESES: Bile salts (BS) are biosurfactants released into the small intestine, which play key and contrasting roles in lipid digestion: they adsorb at interfaces and promote the adsorption of digestive enzymes onto fat droplets, while they also remove lipolysis products from that interface, solubilising them into mixed micelles. Small architectural variations on their chemical structure, specifically their bile acid moiety, are hypothesised to underlie these conflicting functionalities, which should be reflected in different aggregation and solubilisation behaviour. EXPERIMENTS: The micellisation of two BS, sodium taurocholate (NaTC) and sodium taurodeoxycholate (NaTDC), which differ by one hydroxyl group on the bile acid moiety, was assessed by pyrene fluorescence spectroscopy, and the morphology of aggregates formed in the absence and presence of fatty acids (FA) and monoacylglycerols (MAG) - typical lipolysis products - was resolved by small-angle X-ray/neutron scattering (SAXS, SANS) and molecular dynamics simulations. The solubilisation by BS of triacylglycerol-incorporating liposomes - mimicking ingested lipids - was studied by neutron reflectometry and SANS. FINDINGS: Our results demonstrate that BS micelles exhibit an ellipsoidal shape. NaTDC displays a lower critical micellar concentration and forms larger and more spherical aggregates than NaTC. Similar observations were made for BS micelles mixed with FA and MAG. Structural studies with liposomes show that the addition of BS induces their solubilisation into mixed micelles, with NaTDC displaying a higher solubilising capacity.

High-Temperature Behavior of Early Life Membrane Models.

Origin of life scenarios generally assume an onset of cell formation in terrestrial hot springs or in the deep oceans close to hot vents, where energy was available for non-enzymatic reactions. Membranes of the protocells had therefore to withstand extreme conditions different from what is found on the Earth surface today. We present here an exhaustive study of temperature stability up to 80 °C of vesicles formed by a mixture of short-chain fatty acids and alcohols, which are plausible candidates for membranes permitting the compartmentalization of protocells. We confirm that the presence of alcohol has a strong structuring and stabilizing impact on the lamellar structures. Moreover and most importantly, at a high temperature (> 60 °C), we observe a conformational transition in the vesicles, which results from vesicular fusion. Because all the most likely environments for the origin of life involve high temperatures, our results imply the need to take into account such a transition and its effect when studying the behavior of a protomembrane model.

Structural Diversity of Native Major Ampullate, Minor Ampullate, Cylindriform, and Flagelliform Silk Proteins in Solution.

The foundations of silk spinning, the structure, storage, and activation of silk proteins, remain highly debated. By combining solution small-angle neutron and X-ray scattering (SANS and SAXS) alongside circular dichroism (CD), we reveal a shape anisotropy of the four principal native spider silk feedstocks from Nephila edulis. We show that these proteins behave in solution like elongated semiflexible polymers with locally rigid sections. We demonstrated that minor ampullate and cylindriform proteins adopt a monomeric conformation, while major ampullate and flagelliform proteins have a preference for dimerization. From an evolutionary perspective, we propose that such dimerization arose to help the processing of disordered silk proteins. Collectively, our results provide insights into the molecular-scale processing of silk, uncovering a degree of evolutionary convergence in protein structures and chemistry that supports the macroscale micellar/pseudo liquid crystalline spinning mechanisms proposed by the community.

Molecular exchange in spherical diblock copolymer colloids synthesised by polymerisation-induced self-assembly.

HYPOTHESIS: To study molecular exchange between colloids requires the preparation of suitably labelled species. Deuterium isotopic labelling has been used to prepare two chemically identical yet isotopically distinguishable poly(lauryl methacrylate)-poly(methyl methacrylate) (PLMA-PMMA) diblock copolymer colloids by polymerisation-induced self-assembly (PISA) directly in an alkane solvent. Molecular exchange should be detectable by performing small-angle neutron scattering (SANS) measurements on the dispersions. EXPERIMENTS: SANS measurements were performed on fully hydrogenous PLMA39-PMMA57 and deuterated core PLMA39-P(MMA-d8)57 colloids. They were mixed in equal amounts and heated to determine if molecular exchange occurred. PISA syntheses are often thermally initiated, and diblock copolymers self-assemble at elevated temperature, making this an important parameter to study. Experimental data for the mixture were compared to predicted curves for exchanged and non-exchanged colloids. FINDINGS: The scattering of a mixture of fully hydrogenous and deuterated core copolymers does not disappear upon molecular exchange, due to the remaining contrast between the stabiliser and the core and solvent even after the cores fully exchange. By simultaneously fitting the SANS data from dispersions before mixing and using these parameters to constrain fitting the SANS data of mixtures, the molecular exchange between diblock copolymer micelles upon heating is clearly observed.

How Nano-Ions Act Like Ionic Surfactants.

Recently, nanometric ions were shown to adsorb to hydrated neutral surfaces and to bind to the cavities of macrocyclic molecules with an unexpectedly strong affinity arising from a solvent-mediated effect named superchaotropicity. We show here that nano-ions at low concentrations (µm range), similarly to anionic surfactants, induce the spontaneous transformation of a swollen lyotropic lamellar phase of non-ionic surfactant into a vesicle phase. This transition occurs when the neutral lamellae acquire charges, either by adsorption of the nano-ions onto, or by anchoring of the ionic surfactant into the lamellae. In contrast to ionic surfactants, nano-ions strongly dehydrate the neutral surfactant assemblies. As a conclusion, these purely inorganic nanometric ions act as alternatives to the widely used organic ionic surfactants.

A Neutron Scattering Study of the Structure of Poly(dimethylsiloxane)-Stabilized Poly(methyl methacrylate) (PDMS-PMMA) Latexes in Dodecane.

Hard-sphere particles in nonpolar solvents are an essential tool for colloid scientists. Sterically stabilized poly(methyl methacrylate) (PMMA) particles have long been used as the exemplary hard-sphere system. However, neither the particles themselves nor the poly(12-hydroxystearic acid) (PHSA) stabilizer necessary to prevent aggregation in nonpolar solvents are commercially available. To counter this, several alternatives have been proposed. In recent years, there has been an increased interest in poly(dimethylsiloxane) (PDMS) stabilizers as a commercially available alternative to PHSA, yet the structure of particles made in this way is not as well understood as those produced using PHSA. In this work, we employ small-angle neutron scattering to determine the internal structure of PDMS-stabilized PMMA particles, synthesized with and without an additional crosslinking agent. We report data consistent with a homogeneous PMMA core with a linearly decaying PDMS shell. The thickness of the shell was in excess of 50 nm, thicker than the PHSA layer typically used to stabilize PMMA but consistent with reports of the layer thickness for similar molecular weight PDMS at planar surfaces. We also show that the amount of the hydrogenous material in the particle core of the crosslinked particles notably exceeds the amount of added ethylene glycol dimethacrylate crosslinker, suggesting some entrapment of the PDMS stabilizer in the PMMA matrix.

Albumin-driven disassembly of lipidic nanoparticles: the specific case of the squalene-adenosine nanodrug.

In the field of nanomedicine, nanostructured nanoparticles (NPs) made of self-assembling prodrugs emerged in the recent years with promising properties. In particular, squalene-based drug nanoparticles have already shown their efficiency through in vivo experiments. However, a complete pattern of their stability and interactions in the blood stream is still lacking. In this work we assess the behavior of squalene-adenosine (SQAd) nanoparticles - whose neuroprotective effect has already been demonstrated in murine models - in the presence of fetal bovine serum (FBS) and of bovine serum albumin (BSA), the main protein of blood plasma. Extensive physicochemical characterizations were performed using Small Angle Neutron Scattering (SANS), cryogenic transmission electron microscopy (Cryo-TEM), circular dichroism (CD), steady-state fluorescence spectroscopy (SSFS) and isothermal titration calorimetry (ITC) as well as in silico by means of ensemble docking simulations with human serum albumin (HSA). Significant changes in the colloidal stability of the nanoparticles in the presence of serum albumin were observed. SANS, CD and SSFS analyses demonstrated an interaction between SQAd and BSA, with a partial disassembly of the nanoparticles in the presence of BSA and the formation of a complex between SQAd and BSA. The interaction free energy of SQAd nanoparticles with BSA derived from ITC experiments, is about -8 kcal mol-1 which is further supported in silico by ensemble docking simulations. Overall, our results show that serum albumin partially disassembles SQAd nanoparticles by extracting individual SQAd monomers from them. As a consequence, the SQAd nanoparticles would act as a circulating reservoir in the blood stream. The approach developed in this study could be extended to other soft organic nanoparticles.

Interactions of bile salts with a dietary fibre, methylcellulose, and impact on lipolysis.

Methylcellulose (MC) has a demonstrated capacity to reduce fat absorption, hypothetically through bile salt (BS) activity inhibition. We investigated MC cholesterol-lowering mechanism, and compared the influence of two BS, sodium taurocholate (NaTC) and sodium taurodeoxycholate (NaTDC), which differ slightly by their architecture and exhibit contrasting functions during lipolysis. BS/MC bulk interactions were investigated by rheology, and BS behaviour at the MC/water interface studied with surface pressure and ellipsometry measurements. In vitro lipolysis studies were performed to evaluate the effect of BS on MC-stabilised emulsion droplets microstructure, with confocal microscopy, and free fatty acids release, with the pH-stat method. Our results demonstrate that BS structure dictates their interactions with MC, which, in turn, impact lipolysis. Compared to NaTC, NaTDC alters MC viscoelasticity more significantly, which may correlate with its weaker ability to promote lipolysis, and desorbs from the interface at lower concentrations, which may explain its higher propensity to destabilise emulsions.

PEGylated mucus-penetrating nanocrystals for lung delivery of a new FtsZ inhibitor against Burkholderia cenocepacia infection.

C109 is a potent but poorly soluble FtsZ inhibitor displaying promising activity against Burkholderia cenocepacia, a high-risk pathogen for cystic fibrosis (CF) sufferers. To harness C109 for inhalation, we developed nanocrystal-embedded dry powders for inhalation suspension consisting in C109 nanocrystals stabilized with D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) embedded in hydroxypropyl-ß-cyclodextrin (CD). The powders could be safely re-dispersed in water for in vitro aerosolization. Owing to the presence of a PEG shell, the rod shape and the peculiar aspect ratio, C109 nanocrystals were able to diffuse through artificial CF mucus. The promising technological features were completed by encouraging in vitro/in vivo effects. The formulations displayed no toxicity towards human bronchial epithelial cells and were active against planktonic and sessile B. cenocepacia strains. The efficacy of C109 nanosuspensions in combination with piperacillin was confirmed in a Galleria mellonella infection model, strengthening their potential for combined therapy of B. cenocepacia lung infections.

A novel methodology to study nanoporous alumina by small-angle neutron scattering.

Nanoporous anodic aluminium oxide (AAO) membranes are promising host systems for confinement of condensed matter. Characterizing their structure and composition is thus of primary importance for studying the behavior of confined objects. Here a novel methodology to extract quantitative information on the structure and composition of well defined AAO membranes by combining small-angle neutron scattering (SANS) measurements and scanning electron microscopy (SEM) imaging is reported. In particular, (i) information about the pore hexagonal arrangement is extracted from SEM analysis, (ii) the best SANS experimental conditions to perform reliable measurements are determined and (iii) a detailed fitting method is proposed, in which the probed length in the fitting model is a critical parameter related to the longitudinal pore ordering. Finally, to validate this strategy, it is applied to characterize AAOs prepared under different conditions and it is shown that the experimental SANS data can be fully reproduced by a core/shell model, indicating the existence of a contaminated shell. This original approach, based on a detailed and complete description of the SANS data, can be applied to a variety of confining media and will allow the further investigation of condensed matter under confinement.

Supramolecular gels of cholesterol-modified gellan gum with disc-like and worm-like micelles.

The association between a hydrophobically modified polysaccharide, gellan gum, with micelles based on a surfactant bearing the same hydrophobic tail as pendant groups was investigated by rheology and small-angle neutron scattering (SANS). Gellan gum grafted with cholesterol groups (20% mol/mol tetrasaccharide unit), GeCh, was mixed with polyoxyethylene cholesteryl ether (ChEO10), which comprises a cholesterol group as the tail linked to a small polyoxyethylene headgroup, and self-assembles into micelles with an unusual disc-like morphology. The addition of 0.5% polymer to solutions of ChEO10 induced a remarkable transition from a Newtonian fluid to a predominantly solid-like viscoelastic behaviour, leading to a ×105 increase in zero-shear viscosity (with 5% ChEO10). Increasing surfactant concentration led to an enhancement of the viscoelasticity, but the elastic modulus G' reached a plateau around 15% surfactant, attributed to a saturation of the sticker groups. The effect of micellar morphology on the network was studied by adding a small headgroup co-surfactant, triethylene glycol monododecyl ether, to ChEO10 micelles, which drives their elongation into wormlike micelles. Networks obtained with the long, flexible micelles displayed enhanced solid-like behaviour, with no cross-over between G' and G″ over the measured range of frequencies, reflecting relaxation times of the order of minutes or hours. The morphology of the gels studied by SANS revealed a scattering dominated by strongly interacting micelles (described by discs of 140 Šdiameter and a hydrated ∼38 ŠPEO corona) and the presence of micellar clusters induced by the presence of the polymer. The scattering data therefore confirm that the onset of gelation is due to surfactant micelles acting as junction points for the network.

Self-assembled nanostructures in ionic liquids facilitate charge storage at electrified interfaces.

Driven by the potential applications of ionic liquids (ILs) in many emerging electrochemical technologies, recent research efforts have been directed at understanding the complex ion ordering in these systems, to uncover novel energy storage mechanisms at IL-electrode interfaces. Here, we discover that surface-active ILs (SAILs), which contain amphiphilic structures inducing self-assembly, exhibit enhanced charge storage performance at electrified surfaces. Unlike conventional non-amphiphilic ILs, for which ion distribution is dominated by Coulombic interactions, SAILs exhibit significant and competing van der Waals interactions owing to the non-polar surfactant tails, leading to unusual interfacial ion distributions. We reveal that, at an intermediate degree of electrode polarization, SAILs display optimum performance, because the low-charge-density alkyl tails are effectively excluded from the electrode surfaces, whereas the formation of non-polar domains along the surface suppresses undesired overscreening effects. This work represents a crucial step towards understanding the unique interfacial behaviour and electrochemical properties of amphiphilic liquid systems showing long-range ordering, and offers insights into the design principles for high-energy-density electrolytes based on spontaneous self-assembly behaviour.

Molecular insights into the behaviour of bile salts at interfaces: a key to their role in lipid digestion.

HYPOTHESES: Understanding the mechanisms underlying lipolysis is crucial to address the ongoing obesity crisis and associated cardiometabolic disorders. Bile salts (BS), biosurfactants present in the small intestine, play key roles in lipid digestion and absorption. It is hypothesised that their contrasting functionalities - adsorption at oil/water interfaces and shuttling of lipolysis products away from these interfaces - are linked to their structural diversity. We investigate the interfacial films formed by two BS, sodium taurocholate (NaTC) and sodium taurodeoxycholate (NaTDC), differing by the presence or absence of a hydroxyl group on their steroid skeleton. EXPERIMENTS: Their adsorption behaviour at the air/water interface and interaction with a phospholipid monolayer - used to mimic a fat droplet interface - were assessed by surface pressure measurements and ellipsometry, while interfacial morphologies were characterised in the lateral and perpendicular directions by Brewster angle microscopy, X-ray and neutron reflectometry, and molecular dynamics simulations. FINDINGS: Our results provide a comprehensive molecular-level understanding of the mechanisms governing BS interfacial behaviour. NaTC shows a higher affinity for the air/water and lipid/water interfaces, and may therefore favour enzyme adsorption, whereas NaTDC exhibits a higher propensity for desorption from these interfaces, and may thus more effectively displace hydrolysis products from the interface, through dynamic exchange.

Temperature induced conformational changes in the elastin-like peptide GVG(VPGVG)3.

Elastin-like peptides are biopolymers that display LCST behaviour in solution quite similar to other synthetic polymers like polyethylene oxide. Here we study the structure of the peptide GVG(VPGVG)3 in a temperature range of 25 °C to 70 °C with small angle neutron scattering. The LCST for this peptide is outside the experimental range of temperatures. Molecular conformation is well described within the model of a random coil but increasing temperature leads to significant changes. The peptide displays a combination of conformational change and aggregation that show up in the scattering at low and intermediate scattering vector q. The aggregate size is determined from an integral measure of the scattered intensity. It increases with temperature and concentration. For low concentration we find a size variation with temperature that may be related to the collapse of conformation at the inverse temperature transition (ITT).

Self-Assembly of Short Chain Poly- N-isopropylacrylamid Induced by Superchaotropic Keggin Polyoxometalates: From Globules to Sheets.

We show here for the first time that short chain poly( N-isopropylacrylamide) (PNIPAM), one of the most famous thermoresponsive polymers, self-assembles in water to form (i) discrete nanometer-globules and (ii) micrometric sheets with nm-thickness upon addition of the well-known Keggin-type polyoxometalate (POM) H3PW12O40 (PW). The type of self-assembly is controlled by PW concentration: at low PW concentrations, PW adsorbs on PNIPAM chains to form globules consisting of homogeneously distributed PWs in PNIPAM droplets of several nm in size. Upon further addition of PW, a phase transition from globules to micrometric sheets is observed for PNIPAMs above a polymer critical chain length, between 18 and 44 repeating units. The thickness of the sheets is controlled by the PNIPAM chain length, here from 44 to 88 repeating units. The PNIPAM sheets are electrostatically stabilized PWs accumulated on each side of the sheets. The shortest PNIPAM chain with 18 repeating units produces PNIPAM/PW globules with 5-20 nm size but no sheets. The PW/PNIPAM self-assembly arises from a solvent mediated mechanism associated with the partial dehydration of PW and of the PNIPAM, which is related to the general propensity of POMs to adsorb on neutral hydrated surfaces. This effect, known as superchaotropy, is further highlighted by the significant increase in the lower critical solubilization temperature (LCST) of PNIPAM observed upon the addition of PW in the mM range. The influence of the POM nature on the self-assembly of PNIPAM was also investigated by using H4SiW12O40 (SiW) and H3PMo12O40 (PMo), i.e. changing the POM's charge density or polarizability in order to get deeper understanding on the role of electrostatics and polarizability in the PNIPAM self-assembly process. We show here that the superchaotropic behavior of POMs with PNIPAM polymers enables the formation and the shape control of supramolecular organic-inorganic hybrids.